Cleaning your Filter is essential to not only achieve your best results but to maintain the integrity of your RevAir device over time. Filter maintenance is recommended every 3-5 uses.
Removing hair and dust from the Filter basket is not enough.
Cleaning the Filter mesh screen is key!
Empty any accumulated hair or debris from the Filter Basket. Rinse the Filter Basket under warm water. Scrub with a soft brush (toothbrush) and mild dishwashing liquid. Alternatively, with the open side up, run the Filter Basket through the wash cycle in the top rack of your dishwasher.
You can check to see if your Filter needs a good clean by running water through it. If it is not draining easily it needs a good scrub with a toothbrush & dish soap
When your filter is clean light will be able to be seen through the filter screen
*Pictures below exhibits dirty vs clean.
Experiencing issues with your RevAir? Here's a couple great article to view:
Is it time to clean your Filter?
What product's can, or can't I use?
Save time by adding a washable foam liner inside of your stainless steel filter to make filter cleaning easier than ever. The foam liner acts as a barrier to protect your stainless steel filter and minimize build-up within the mesh that requires scrubbing.